60FT power-wheel drag racing for kids ages 1-10 years old on a real timing system!
Registration is FREE for the kids!

Gates will open at 10AM, open test runs starting at approximately 11:00am, and 1st round of racing at 12:00PM.

• RACERS MUST BE PER-REGISTERED TO COMPETE. *

CLICK HERE TO PRE-REGISTER

EVENT RULES

- Parents/Guardian must sign the certified waiver at the event for their child to participate.

- Parents/Guardian must be present for the driver’s meeting in order for their child to participate in the race.

- Parents/Guardian must be present during their child’s race.

- Each racer needs 2 crew members. 1 at the starting line and 1 at the end of the race to help the driver stop. Our staff is very helpful and you can ask for help if you do not come with a 2nd person.

CLASS RULES

STOCK: Drivers must be 2-10 years old.

Factory setup, 6v or 12v.  NO MODIFICATIONS TO MOTORS OR GEAR BOXES. HELMETS REQUIRED. *Traction on the tires is okay, rubber or foam*

STOCK (REMOTE CONTROL): Exhibition only. Drivers must be 1-10 years old.

Factory setup, 6v or 12v. Remote control is allowed! Remote control cars will only race other remote cars.  NO MODIFICATIONS TO MOTORS OR GEAR BOXES. HELMETS REQUIRED. *Traction on the tires is okay, rubber or foam*. This class is exhibition only. No awards.

MODIFIED CLASS (DRILL BATTERY): Drivers must be 2-10 years old.

A power-wheel equipped with an 18v/20v drill battery. Must have a kill switch installed that the driver can hit with there hand if need be. 100+amp circuit breaker. Wheelie bars and neck brace Recommended but not required, parents be smart! ANY VEHICLE WITH A GEAR DELETE MUST HAVE A FUNCTIONING BRAKE.  HELMETS  REQUIRED. LONG SLEEVES and GLOVES REQUIRED (any style glove is okay)

OUTLAW CLASS (24V+): Drivers must be 2-10 years old.

You must have experience in the “modified” class before running in Outlaw. 24  volts or more. NO Gas Motors. Must retain a power-wheel gear box. NO BRUSHLESS SETUPS! Must have a kill switch installed where the child can reach to shut down the vehicle . 100+amp circuit breaker. The vehicle must be utilizing 10 gauge or thicker wire, A heavy duty solenoid or ESC. . HELMETS REQUIRED. LONG SLEEVES and GLOVES (any style glove is okay). NECK BRACE/HANZ DEVICE REQUIRED. BRAKES REQUIRED. EXPERIENCE REQUIRED. “LICENSE PASS’S”  REQUIRED FOR ANY NEW OUTLAW DRIVERS(SOLO RUN BEFORE COMPETITION). IF YOU’RE EXCEEDING 30 MPH, a ROLL CAGE, 5 POINT HARNESS,AND  WINDOW NET IS REQUIRED. (cage must be a attached to a full steel/stainless/titanium chassis if you’re going the cage route)

If you have any questions feel free to email Alex: trevorsfastlife@gmail.com

You can also check out TrevorsFastLife YouTube channel for tutorials on setting up your power-wheel drag car: https://www.youtube.com/@TrevorsFastLife/videos

For disk brakes check out www.Ejconceptz.com

For wheelie bar tutorials and other brake options check out @TrevorsFastLife on YouTube

For actuator “Lift Style” brake kits contact Alex: trevorsfastlife@gmail.com

If you have any further questions feel free to email Alex: trevorsfastlife@gmail.com